| Model Number | ID034 |
| Voltage/Frequency | 110V/230V~50Hz/60Hz |
| In-put Power | 900W |
| No Load Speed | 0-3000/min |
| Impact Rate | 0-48000/min |
| Key Chuck Size | 13mm |
| Max drilling capacity | concrete/steel/wood:16/13/30mm |
| Qty/Ctn | 5pcs |
| G.W/N.W | 17.2/16.2kg |
| Dimensions | 47x35x28cm |
| Qty/20GP | 4200pcs |
POWERFULL MOTOR The 900W hand drill motor is suitable for drilling in brick and masonry, as well as for drilling in wood, metal, ceramic and plastic, using hammer mechanism is for drilling in masonry and the hammer mode can be switched off for regular drilling and screw driving.
VARIABLE SPEED switch with speed pre-selection gives versatility and control of your job for the best results. For your convenience you can lock the trigger for continuous drilling and driving.
COMPACT DESIGN and convenient features, for instance the function indicator. This corded drill has a 13 mm keyed chuck, so you can secure the chuck extremely tight and prevent the drill from slipping during the job.
REVERSING FUNCTION This Impact Drill comes in handy for instance when you're loosening or removing screw or making hole. The clear function indicator will show you which operating mode is active. The tool is supplied with a 360-degree side handle for comfortable two-handed control and includes a depth gauge to set the drilling depth for blind holes.
LIGHTWEIGHT OUTSTANDING PERFORMANCE small Hand Drill combines both rotation and impact to bore holes in concrete, marble, granite and tiles. Switch to rotation-only mode to drill in metal, wood or plastic, or use it as screwdriver.
